Coilmaster Electronics Co., Ltd. - Automotive & Industrial Inductors & Transformers | High Current Power Solutions | Coilmaster

The wire wound inductor disconnected, what is the cause? | Common Mode Power Line Choke Manufacturer | Coilmaster Electronics

In order to focus on the performance, there are portions of the wire wound inductor which are coated with resin. Even if there is coating, the lead lines are not protected. For this reason, pay sufficient attention when handling the components, and be careful not to scratch the components with pincettes or etc. Also, if the board mounted with components is stored in a stack, the corner of the boards will make contact with the components of the other boards and cause wire breakage. Coilmaster Electronics is Taiwan high-current High Current Power Inductors, Automotive Grade Chokes & Inductors,High Frequency and Planar Transformers, LAN Magnetics (RJ45), Multilayer Chip Beads manufacturer since 1995. Coilmaster offers AEC-Q200 certified, high-efficiency power inductors, chokes, and transformers. Specializing in low-loss, high-current components for Automotive, 5G, and Industrial applications. Contact our experts for instant support. With more than 20 years of experience in magnetic territory, Coilmaster Electronics is specialized in the production of SMD power inductors, common mode choke, high frequency transformers.

Advanced Search

The wire wound inductor disconnected, what is the cause? | Common Mode Power Line Choke Manufacturer | Coilmaster Electronics

The wire wound inductor disconnected, what is the cause? | Specializing in High Current SMD Inductors, Common Mode Chokes, and High-Frequency Magnetics

The wire wound inductor disconnected, what is the cause?

In order to focus on the performance, there are portions of the wire wound inductor which are coated with resin. Even if there is coating, the lead lines are not protected. For this reason, pay sufficient attention when handling the components, and be careful not to scratch the components with pincettes or etc. Also, if the board mounted with components is stored in a stack, the corner of the boards will make contact with the components of the other boards and cause wire breakage.


The wire wound inductor disconnected, what is the cause? | High Voltage Power Inductors Manufacturer | Coilmaster Electronics

Located in Taiwan since 1995, Coilmaster Electronics Co., Ltd. has been a manufacturer of magnetic components. Its main magnetic components include, common mode chokes, SMD molding power chokes, chock coil inductors, SMD shielded and semi-shielded power inductors, low profile and high current power inductors, high voltage power inductors, ethernet and LAN power transformers, flat wire inductors, RJ45 jacks with integrated magnetics and high frequency transformers, and ceramic or air coil multilayer chip inductors.

Coilmaster offers AEC-Q200 certified, high-efficiency power inductors, chokes, and transformers. Specializing in low-loss, high-current components for Automotive, 5G, and Industrial applications. Contact our experts for instant support. With more than 20 years of experience in magnetic territory, Coilmaster Electronics is specialized in the production of SMD power inductors, common mode choke, high frequency transformers.

Coilmaster Electronics has been providing customers with high current power inductors since 1995, with both advanced technology and 29 years of experience, Coilmaster Electronics ensures that each customer's requirements are met.